MaytagRepair Miami
(305) 853-8839 Book a visit

Broward · South Florida

Maytag repair in Pembroke Pines

A wide spread of housing ages, and equipment to match. Legacy series still working after twenty years are a regular sight, and parts for them can take a few days to source.

We cover Pembroke Pines and the rest of Broward: an on-site diagnostic first, the price agreed in writing before anything is opened, and the exact figure confirmed once we have seen the unit.

Book a diagnostic (305) 853-8839

By unit

Start with whichever matches yours. How an appliance is installed shapes the visit as much as the repair does, which is why we ask about it when you book.

  • An over-the-range microwave mounted above a cooktop in a dark kitchen at night
    Over-the-range and countertop · no built-in in this catalog

    Maytag microwave repair in Pembroke Pines

    235 pages and 76 code pages, and they are not spread evenly: 67 of them belong to the over-the-range machine and 9 to the countertop one. That matches what these appliances actually are. An over-the-range microwave is also the kitchen's hood — it carries a fan, a damper, a light and a duct — so it fails in ways a countertop machine cannot, and this make documents it accordingly. There is no built-in microwave in this catalog: that branch belongs to a sister brand, and on that sister's own base every page of it now answers 404.

    • Over-the-range machines, which are also the hood, and countertop machines
    • 67 code pages on over-the-range, 9 on countertop
    • No built-in microwave under this badge
    Microwave repair
  • A freestanding electric range standing between two runs of dark base cabinets in a near-black kitchen at night, its smooth black ceramic top empty and unlit, the oven door closed, a plain back console with unreadable knobs.
    Freestanding, slide-in and drop-in · gas or electric

    Maytag range repair in Pembroke Pines

    355 pages, 170 of them numbered — the second most documented appliance this make builds, and the one most likely to tell you what is wrong before anybody arrives. A range is also the appliance where the two halves of a Maytag kitchen meet: the oven cavity below, which this make documents heavily, and the surface on top, which it documents unevenly. An electric surface has 83 code pages behind it. A gas surface has none at all, on this make, in this base — so a gas range call is a longer conversation on the phone by necessity rather than by preference.

    • Freestanding and slide-in ranges, gas and electric
    • 170 code pages — the oven half of the machine is heavily documented
    • Gas surfaces publish no codes at all: what the burner does is the whole diagnosis
    Range repair
  • A wall-mounted stainless chimney hood above an empty cooktop, seen from below along its underside and flue
    Under-cabinet and wall-mount · ducted or recirculating

    Maytag range hood repair in Pembroke Pines

    The smallest branch in this catalog — 43 pages and three numbered conditions — and the appliance most likely to be the microwave above the range rather than a hood at all. On this make the over-the-range microwave carries the ventilation for most kitchens, so a hood call here begins by establishing which appliance is actually over the cooktop. Where there is a dedicated hood, the failures are ordinary and mostly mechanical: the fan motor, the switch, the light, the damper and the duct behind it.

    • Wall-mount and under-cabinet hoods, ducted and recirculating
    • 43 pages and three published conditions — the least documented appliance here
    • On most Maytag kitchens the over-the-range microwave IS the hood
    Range hood repair
  • A tall four-door French door refrigerator standing flush at the end of a run of slab-front cabinets in an evening kitchen
    French door · side-by-side · top freezer

    Maytag refrigerator repair in Pembroke Pines

    Five hundred and nine pages in the maker's own base, and twenty-six of them numbered. Hold those two figures next to the seventy-five percent of wall-oven pages that carry a code and you have the whole character of this make in one comparison. Cold is where it stops explaining itself: seventeen numbered pages behind the French door cabinet, nine behind side-by-side, and on the top-freezer cabinet — eighty-four pages of guidance — not one. A visit here is therefore an hour with instruments rather than ten minutes with a panel, and that is worth knowing before you book. There is no quad-door cabinet and no all-refrigerator under this badge; both belong to a sister brand.

    • French door, side-by-side and top-freezer cabinets
    • Seventeen numbered pages on French door, nine on side-by-side, none on top freezer
    • Instruments rather than a panel: this half of the catalog explains very little
    Refrigerator repair
  • A smooth black ceramic cooktop set into a dark stone counter, photographed from above and slightly to the side in a near-black kitchen, two radiant coil zones glowing dull orange beneath the glass and the other two dark.
    Electric radiant and gas · no induction in this catalog

    Maytag cooktop repair in Pembroke Pines

    211 pages, and the split inside them is the story: 83 code pages on the electric surface and zero on the gas one. There is no induction cooktop under this badge at all — that is a sister brand's product, not this one's — so a Maytag surface is radiant electric or it is gas, and which it is decides whether the appliance can tell you anything. The electric top talks. The gas top does not, and never has, so the diagnosis is what the burner does and how it does it.

    • Radiant electric and gas surfaces — no induction in this catalog
    • 83 code pages on electric, none at all on gas
    • A cracked glass surface is the one thing here we ask you to stop using immediately
    Cooktop repair
  • A front-load dryer beside a small laundry-room window at dusk, blue light across its flat front
    Electric and gas · vented · commercial-grade residential

    Maytag dryer repair in Pembroke Pines

    189 pages and 56 of them numbered, plus a commercial branch of 73 pages with 39 more. Every dryer under this badge is a vented machine — there is no heat-pump model and no compact one, which is a real difference from the sister brands in the same corporation and it decides the whole diagnosis. A vented dryer lives or dies by the duct behind it, and in South Florida that duct is more often long and horizontal than short and vertical, and it carries air that arrived with plenty of moisture of its own. So a dryer here gets slower every season until somebody finally counts the cycles, and the machine at that point is usually fine.

    • Vented electric and gas dryers, and the commercial-grade residential machines
    • 56 code pages, and 39 more on the commercial dryer
    • No heat-pump and no compact model — the duct is the diagnosis
    Dryer repair

By job

Starting figures for this equipment in South Florida. What moves them is the model, the access and the part — the exact cost is confirmed after the on-site diagnostic.

  • The top trim of an oven frame removed to expose the motorized door latch and its switch, the latch arm half across its keeper, a small screwdriver and the removed trim lying on a towel over the open door.
    from $155

    Self-clean and door lock repair

    The oven holds its door shut through a self-clean and releases as it cools. When it does not, that is the motorized latch, and it is a same-day call rather than something to live with — an oven you cannot open is a kitchen missing an appliance. The one thing not to do is run the cycle again: a stalled latch put through the same heat is how this gets more expensive.

    • A same-day job: an oven locked shut is a kitchen missing an appliance
    • Do not run the cycle again — that is how the latch gets worse
    • The reason the clean stopped early is found too, not just the latch
    What this involves
  • A multimeter and an open notebook on a dark counter beside an appliance whose panel is dark, a hand writing. One visit, one answer in writing, which is what this page promises.
    from $89

    Diagnostic visit

    We find out what is wrong before anybody quotes a part, and on this make that means two different visits depending on which half of the kitchen we are in. A washer or an oven will usually be showing something, and the first ten minutes are spent reading it. A refrigerator or a freezer will be showing nothing at all, because this maker publishes almost no codes for cold, and those minutes go on thermometers instead. The fee comes off the bill when you go ahead with the work.

    • Read first where the machine talks, measure first where it does not
    • Age is established early: these machines are routinely older than the kitchen
    • Credited toward the repair
    What this involves
  • The inner rear panel of a freezer removed and leaning aside, a small evaporator fan motor with its plastic blade lifted out on a gloved palm and its harness trailing back into the opening, frost still on the coil behind.
    from $155

    Evaporator fan repair

    The reason a freezer holds perfectly while the food section goes warm. One compressor serves the whole cabinet, so cold is being made and simply is not arriving — and the part that moves it is behind the rear panel with the shelves out. It is a short repair once the panel is off and a longer diagnosis before that, because on this make nothing on the front of the appliance will point at it.

    • The classic warm-fresh-food, cold-freezer complaint
    • Behind the rear panel: the strip-down is the job, the part is not
    • The ice that stopped the blade is checked for as well as the blade
    What this involves
  • A gloved hand holding a warm cloth around the small white fill tube at the back of a freezer wall, a plug of ice half melted at its mouth. The frozen fill tube is the single commonest cause on this page and this is exactly it.
    from $125

    Ice maker water line and fill valve service

    Everything between the shut-off and the mold, which is where most low-ice calls actually end. These modules mind flow rather than pressure, so a tired filter or a saddle valve left half open will starve one gradually enough that nothing ever appears broken — production just falls month by month. This is the least expensive ice job on the list, and the one people most often assume will be the dearest.

    • Flow measured at the machine, not judged from the kitchen tap
    • Filter age is a real variable here and it is treated as one
    • The kink a reinstall leaves in the line is looked for every time
    What this involves
  • The door lock unit of a front-load washing machine drawn out of its cutout in the front panel and hanging on its wiring loom, the rubber boot folded aside, a torch on the floor lighting the opening from below.
    from $145

    Washer door lock repair

    Front-load machines, where the lock has to hold a door that is carrying its own weight on a hinge. A machine that will not start often believes the door is open; a machine that will not open usually still has water in it and is refusing on purpose. Neither is the same repair, and forcing the door is the one thing that turns an inexpensive part into a panel.

    • A door that will not open with water inside is the machine protecting your floor
    • Forcing it is the commonest way this repair gets more expensive
    • A dropped door is fixed with the lock, or the new lock fails the same way
    What this involves
  • A detergent dispenser drawer pulled right out of a washing machine and held over a laundry sink, its compartments and the channels behind it crusted with dried blue-white softener residue, a brush in the other hand.
    from $99

    Washer excess suds service

    The cheapest row on this site, and the one most often solved by explanation rather than by parts. A modern machine uses far less water than the one it replaced, so the detergent dose somebody learned twenty years ago is now several times too much — and this water carries enough mineral to change how it behaves. Suds cushion the load, confuse the level sensing, and produce a machine that runs long, rinses badly and smells.

    • Usually dose and water rather than any part of the machine
    • Suds confuse the level sensing, so this arrives as a cycle-length complaint
    • A maintenance cycle and a dose change, and it is measured afterwards
    What this involves

Nearby

Where else we work near Pembroke Pines

Every place below has its own page, with what the equipment and the access are like there.

Elsewhere in Broward

See the whole service area

In more detail

Maytag repair in Pembroke Pines, in more detail

What Maytag equipment is like in Pembroke Pines

A wide spread of housing ages, and equipment to match. Legacy series still working after twenty years are a regular sight, and parts for them can take a few days to source.

Pembroke Pines sits in Broward County, and the equipment here follows the housing: older kitchens with appliances fitted into openings that were cut for something else, and newer ones where they were specified with the cabinetry. Both are Maytag work — cooktops, dishwashers, dryers — and both are diagnosed on site before anything is priced.

Heat, dust and power cuts — what they do to a kitchen full of appliances

Inland the enemy is heat, dust and grease rather than salt. Condensers run hard for more months of the year here than almost anywhere else in the country, and grease that condenses in a hood liner instead of leaving through it comes back as a fan that labors. In Pembroke Pines the appliances we are called out to are usually working exactly as designed — in conditions nobody designed them for.

What that means for the appliances in Pembroke Pines

  • The housing here spans decades and so does the equipment in it. The model number decides which conversation we are having, which is why it is the first thing we ask for.

How a visit in Pembroke Pines is arranged

We ask for the model number from the plate inside the door and a line about what the appliance is doing. That decides which parts ride in the van, and it is the difference between one appointment and two.

  • How the appliance is built in, and whether it has ever been pulled out before
  • Whether there is a second one — a bar, a pantry, a garage or an outdoor kitchen
  • Whether the doors are paneled to match the cabinetry, which changes how they come off and go back
  • The diagnosis first, then the scope and the price in writing, and your approval before anything is opened

What it costs, and what moves the figure

Prices in Pembroke Pines are the same as everywhere else we cover: a diagnostic from $89 that is credited toward the repair, and starting figures per job rather than one number for "a repair". What moves it is the model, how the appliance is built into the cabinetry, which part it needs and how quickly that part can be sourced — none of which can be judged over the phone. The repairs we carry out lists what each job involves and the figure it starts at, and the unit pages covers what tends to go wrong on each type.

The exact cost is confirmed after the on-site diagnostic and agreed with you before any work begins. We are an independent repair company — not affiliated with, authorized by, or endorsed by any manufacturer — and our warranty covers the labor we performed.

Before you book

Questions about a visit in Pembroke Pines

Do you cover Pembroke Pines?

Yes. Pembroke Pines is in Broward County and inside the area we work every week. Give us the address when you book, and say how the Maytag is installed — what has to come apart to reach it matters as much as where it is.

How soon can you get to Pembroke Pines?

We will tell you the earliest slot we can genuinely keep rather than the earliest one that sounds good. Tell us the model number and what the unit is doing when you book: whether we can finish the same day depends on the part far more than on the drive.

Does it cost more because the job is in Pembroke Pines?

No. The diagnostic and the work are priced the same across Miami-Dade, Broward and Palm Beach. What moves the figure is the model, how the unit is built in and which part it needs — never the address. Where access takes longer, we say so before anything is agreed rather than after.

What do you need from me before the visit in Pembroke Pines?

The model number from the data plate, a photograph of the display if anything is showing on it, and a line about what the unit is doing. Those three decide which parts a technician brings, and they are the difference between one visit and two.

Booking a visit in Pembroke Pines

Tell us the model number and what the unit is doing. We will bring the parts that problem usually needs, and you will have a firm price before we start.

Schedule a visit Call (305) 853-8839

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 853-8839