MaytagRepair Miami
(305) 853-8839 Book a visit

Palm Beach · South Florida

Maytag repair in Highland Beach

A narrow coastal strip of condominium buildings with the ocean on one side and the Intracoastal on the other. Corrosion is routine rather than unusual here.

We cover Highland Beach and the rest of Palm Beach: an on-site diagnostic first, the price agreed in writing before anything is opened, and the exact figure confirmed once we have seen the unit.

Book a diagnostic (305) 853-8839

By unit

Start with whichever matches yours. How an appliance is installed shapes the visit as much as the repair does, which is why we ask about it when you book.

  • A wall-mounted stainless chimney hood above an empty cooktop, seen from below along its underside and flue
    Under-cabinet and wall-mount · ducted or recirculating

    Maytag range hood repair in Highland Beach

    The smallest branch in this catalog — 43 pages and three numbered conditions — and the appliance most likely to be the microwave above the range rather than a hood at all. On this make the over-the-range microwave carries the ventilation for most kitchens, so a hood call here begins by establishing which appliance is actually over the cooktop. Where there is a dedicated hood, the failures are ordinary and mostly mechanical: the fan motor, the switch, the light, the damper and the duct behind it.

    • Wall-mount and under-cabinet hoods, ducted and recirculating
    • 43 pages and three published conditions — the least documented appliance here
    • On most Maytag kitchens the over-the-range microwave IS the hood
    Range hood repair
  • An over-the-range microwave mounted above a cooktop in a dark kitchen at night
    Over-the-range and countertop · no built-in in this catalog

    Maytag microwave repair in Highland Beach

    235 pages and 76 code pages, and they are not spread evenly: 67 of them belong to the over-the-range machine and 9 to the countertop one. That matches what these appliances actually are. An over-the-range microwave is also the kitchen's hood — it carries a fan, a damper, a light and a duct — so it fails in ways a countertop machine cannot, and this make documents it accordingly. There is no built-in microwave in this catalog: that branch belongs to a sister brand, and on that sister's own base every page of it now answers 404.

    • Over-the-range machines, which are also the hood, and countertop machines
    • 67 code pages on over-the-range, 9 on countertop
    • No built-in microwave under this badge
    Microwave repair
  • A white top-load washing machine standing in a narrow laundry closet at dusk with its lid raised, an empty stainless basket below and a tall finned center agitator post rising from the middle of it.
    Top load · front load · commercial-grade residential

    Maytag washer repair in Highland Beach

    This is the deepest branch of Maytag's own support base and the oldest thing the badge does — the company has been building washing machines since 1907. 479 pages, and 158 of them are code pages: 86 on the top-load machine, 62 on the front-load. That is more numbered diagnosis than the whole refrigeration half of the catalog gets, and it changes how a washer call starts. On most makes we ask what the machine is doing; here we ask what it is showing, because it will usually be showing something. The top-loader is the one Maytag is bought for and the one that outlives its kitchen — which is also why so many of the machines we open here are older than the room around them.

    • Top-load, front-load and commercial-grade residential machines
    • 86 code pages on top load, 62 on front load — the make's most documented appliance
    • Older machines are normal here: the badge is bought to be kept
    Washer repair
  • A dishwasher door open to horizontal in a dark kitchen with the lower rack halfway out, a plain stainless front in a dark cabinet run
    Front control and top control · stainless and plastic tubs

    Maytag dishwasher repair in Highland Beach

    296 pages with 42 numbered conditions, and a code branch of its own — 38 of those 42 sit under a single heading the make calls Error Code or Flashing Lights. That last phrase is the useful part: on a machine with no digital display the diagnosis is a pattern of blinking lights, and the pattern is the whole message. It disappears the moment the power is cut, which is why we ask what the lights were doing before anybody reached for the breaker.

    • Front-control and top-control machines, stainless and plastic tubs
    • 42 code pages, 38 of them under one Error Code or Flashing Lights heading
    • On a machine with no display, the blinking pattern IS the code
    Dishwasher repair
  • A front-load dryer beside a small laundry-room window at dusk, blue light across its flat front
    Electric and gas · vented · commercial-grade residential

    Maytag dryer repair in Highland Beach

    189 pages and 56 of them numbered, plus a commercial branch of 73 pages with 39 more. Every dryer under this badge is a vented machine — there is no heat-pump model and no compact one, which is a real difference from the sister brands in the same corporation and it decides the whole diagnosis. A vented dryer lives or dies by the duct behind it, and in South Florida that duct is more often long and horizontal than short and vertical, and it carries air that arrived with plenty of moisture of its own. So a dryer here gets slower every season until somebody finally counts the cycles, and the machine at that point is usually fine.

    • Vented electric and gas dryers, and the commercial-grade residential machines
    • 56 code pages, and 39 more on the commercial dryer
    • No heat-pump and no compact model — the duct is the diagnosis
    Dryer repair
  • A tall four-door French door refrigerator standing flush at the end of a run of slab-front cabinets in an evening kitchen
    French door · side-by-side · top freezer

    Maytag refrigerator repair in Highland Beach

    Five hundred and nine pages in the maker's own base, and twenty-six of them numbered. Hold those two figures next to the seventy-five percent of wall-oven pages that carry a code and you have the whole character of this make in one comparison. Cold is where it stops explaining itself: seventeen numbered pages behind the French door cabinet, nine behind side-by-side, and on the top-freezer cabinet — eighty-four pages of guidance — not one. A visit here is therefore an hour with instruments rather than ten minutes with a panel, and that is worth knowing before you book. There is no quad-door cabinet and no all-refrigerator under this badge; both belong to a sister brand.

    • French door, side-by-side and top-freezer cabinets
    • Seventeen numbered pages on French door, nine on side-by-side, none on top freezer
    • Instruments rather than a panel: this half of the catalog explains very little
    Refrigerator repair

By job

Starting figures for this equipment in South Florida. What moves them is the model, the access and the part — the exact cost is confirmed after the on-site diagnostic.

  • A flat radiant coil element unhooked from its bracket and lifted a few inches beneath a raised ceramic cooking top in a dark kitchen, its two leads stretched, the empty reflector pan below it.
    from $175

    Electric cooktop element repair

    The half of the cooking line that does report numbers — eighty-three numbered pages across a hundred and fourteen — so an electric surface will usually say something before anybody lifts the glass. Most of what it says points at an element, a switch or the control underneath, and the awkward part is not the diagnosis but the top: the glass comes up, and it goes back onto seals and clamps that must not be over-tightened.

    • 83 numbered pages behind this surface — it usually reports something
    • The glass comes up and goes back on seals that are not over-tightened
    • A zone switching itself off is usually the protection working, not a part
    What this involves
  • A bake element unbolted from the floor of an oven cavity and drawn forward a hand's width on its two leads, held in a gloved hand, the cavity dark behind and one work light raking in from the open door.
    from $155

    Oven not heating repair

    Cold, or heating to the wrong number, and the two are different jobs. This is the most documented appliance the maker builds — a hundred and seventy-five numbered pages out of two hundred and ninety-three on wall ovens — so the display usually names the subsystem before anybody arrives. On a wall oven the price carries the access as much as the part: a tall housing, a heavy cabinet and a run of joinery either side.

    • The display usually names the subsystem: photograph it before switching off
    • Consistently wrong and swinging wrong are different diagnoses
    • On a wall oven the access is most of the cost, so the code decides the first visit
    What this involves
  • A small ceramic igniter on its bracket held in front of an opened gas dryer burner tube. The igniter is the commonest gas dryer repair there is, and the open burner tube behind it is the sequence you listen for.
    from $175

    Gas dryer igniter and valve repair

    On a gas machine the igniter is the usual answer and it fails in a way that looks exactly like no heat at all — it weakens for months before it stops, so the complaint that arrives is a dryer taking two cycles rather than a dryer that is cold. After that it is the flame sensor and the valve coils, and the order matters because two of the three are inexpensive and one is not.

    • A weakening igniter arrives as slow drying, not as no heat
    • Flame sensor and valve coils measured, not swapped in hope
    • The duct is checked here too — a gas machine overheats for the same reasons
    What this involves
  • A suspension damper unbolted from the outer tub and held clear of its bracket, the machine on its side on a blanket. On its side is the honest part: this is the repair that means the machine comes apart.
    from $285

    Washer suspension and bearing repair

    The repair this make needs and its sister sites rarely quote, because this is the badge people keep. A noise that arrives with the spin and quiets as it slows is the classic bearing signature, and it does not appear overnight — it is usually years of spinning slightly out of balance, on a machine that has outlived two kitchens. Caught early it is a repair in the middle of a life. Left alone, the bearing takes the drum and the shaft with it.

    • Rising with the spin and falling with it: the bearing signature
    • Suspension first, because it is what wore the bearing out
    • Priced against the cabinet's remaining life, honestly, before the work
    What this involves
  • The door lock unit of a front-load washing machine drawn out of its cutout in the front panel and hanging on its wiring loom, the rubber boot folded aside, a torch on the floor lighting the opening from below.
    from $145

    Washer door lock repair

    Front-load machines, where the lock has to hold a door that is carrying its own weight on a hinge. A machine that will not start often believes the door is open; a machine that will not open usually still has water in it and is refusing on purpose. Neither is the same repair, and forcing the door is the one thing that turns an inexpensive part into a panel.

    • A door that will not open with water inside is the machine protecting your floor
    • Forcing it is the commonest way this repair gets more expensive
    • A dropped door is fixed with the lock, or the new lock fails the same way
    What this involves
  • A finger tracing a wet line along the bottom edge of an open dishwasher door where the seal meets the tub, a dark puddle on the tile. The door gasket is the first thing checked and the bottom edge is where it shows.
    from $145

    Dishwasher leak repair

    Water on the floor in front of the machine, or under a cabinet run where nobody sees it for months. Finding it costs more than fixing it: a door gasket, a sump seal, a hose that weeps only under pressure at one point in the cycle. In a fitted kitchen the expensive half of this repair is the joinery, so it is dealt with as a today job rather than a weekend one.

    • Found by running the machine and watching, not by guessing at the part
    • A leak that appears at one point in the cycle points at one part
    • The cabinet base is inspected before we leave
    What this involves

Nearby

Where else we work near Highland Beach

Every place below has its own page, with what the equipment and the access are like there.

Elsewhere in Palm Beach

See the whole service area

In more detail

Maytag repair in Highland Beach, in more detail

What Maytag equipment is like in Highland Beach

A narrow coastal strip of condominium buildings with the ocean on one side and the Intracoastal on the other. Corrosion is routine rather than unusual here.

Highland Beach sits in Palm Beach County, and the equipment here follows the housing: older kitchens with appliances fitted into openings that were cut for something else, and newer ones where they were specified with the cabinetry. Both are Maytag work — cooktops, dishwashers, dryers — and both are diagnosed on site before anything is priced.

Salt, heat and storms — what they do to a kitchen full of appliances

Close to the water everything ages from the outside in. Salt corrodes the condenser coils and fan motors on the cold side and reaches burner caps, grates and igniters on the hot side, and both fail in the same way: a part that still works, slowly, until the day it does not. In Highland Beach that turns a cleaning interval into a seasonal job rather than an annual one, on both halves of the kitchen.

What that means for the appliances in Highland Beach

  • Washers — Laundry in a tower is a closet off the hallway with the pair stacked in it. Getting a hand behind the machine is most of the appointment, and it is why we ask how yours is installed before we come.
  • Cooktops — Burner caps, grates and igniter electrodes take the salt here. An igniter sparking through corrosion is an igniter that clicks and does not light, and it happens on a shorter schedule near the water.
  • Refrigerators — A refrigerator in a tower has less air around it and a warmer cabinet behind it than the same unit in a house, so the condenser matters more here and the cleaning interval is shorter than the manual assumes.

How a visit in Highland Beach is arranged

We ask for the model number from the plate inside the door and a line about what the appliance is doing. That decides which parts ride in the van, and it is the difference between one appointment and two.

  • In a building: the service elevator window, the loading bay and the hours contractors are allowed to work
  • Behind a gate: how visitors are cleared, arranged before the appointment rather than at it
  • Whether the doors are paneled to match the cabinetry, which changes how they come off and go back
  • The diagnosis first, then the scope and the price in writing, and your approval before anything is opened

What it costs, and what moves the figure

Prices in Highland Beach are the same as everywhere else we cover: a diagnostic from $89 that is credited toward the repair, and starting figures per job rather than one number for "a repair". What moves it is the model, how the appliance is built into the cabinetry, which part it needs and how quickly that part can be sourced — none of which can be judged over the phone. The repairs we carry out lists what each job involves and the figure it starts at, and the unit pages covers what tends to go wrong on each type.

The exact cost is confirmed after the on-site diagnostic and agreed with you before any work begins. We are an independent repair company — not affiliated with, authorized by, or endorsed by any manufacturer — and our warranty covers the labor we performed.

Before you book

Questions about a visit in Highland Beach

Do you cover Highland Beach?

Yes. Highland Beach is in Palm Beach County and inside the area we work every week. Give us the address when you book, and say how the Maytag is installed — what has to come apart to reach it matters as much as where it is.

How soon can you get to Highland Beach?

We will tell you the earliest slot we can genuinely keep rather than the earliest one that sounds good. Tell us the model number and what the unit is doing when you book: whether we can finish the same day depends on the part far more than on the drive.

Does it cost more because the job is in Highland Beach?

No. The diagnostic and the work are priced the same across Miami-Dade, Broward and Palm Beach. What moves the figure is the model, how the unit is built in and which part it needs — never the address. Where access takes longer, we say so before anything is agreed rather than after.

My building has rules about service calls. What do you need?

The building name when you book, and anything it requires — a service elevator window, a loading bay slot, approved hours or a certificate of insurance. We arrange those in advance; found out on the day, they cost the appointment.

Booking a visit in Highland Beach

Tell us the model number and what the unit is doing. We will bring the parts that problem usually needs, and you will have a firm price before we start.

Schedule a visit Call (305) 853-8839

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards
Call (305) 853-8839